Jenbacher Type 6

Cutting-edge technology

Continuously refined based on our extensive experience, the Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 3 MW power range. Its 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and optimized components enable a service life of 60,000 operating hours before the first major overhaul.
Select Language
Go

Features & Benefits

  • High output density at 1,500 rpm
  • Prechamber combustion ensures maximum efficiency
  • Turbocharger bypass evens out extreme operating conditions
  • External dry exhaust manifold ensures long cylinder head life
  • Selective knocking control for each cylinder ensures optimal protection
  • LEANOX® lean burn control ensures minimal emissions
Technical Specifications J612 GS
Number of cylinders / arrangement:12 / V 60°
Combustion:Lean burn principle
Bore:7.48 inch (190 mm)
Stroke:8.66 inch (220 mm)
Speed: 1,500 rpm (50 Hz)
1,500 rpm with gear box
(60 Hz)
Gen-Set dimensions (inch):360 (length) x 90 (width) x 110 (height)
Gen-Set dimensions (mm):7,600 (length) x 2,200 (width) x 2,800 (height)
Gen-Set Weight: 41,240 lbs (19,100 kg)


Technical Specifications J616 GS
Number of cylinders / arrangement:16 / V 60°
Combustion:Lean burn principle
Bore:7.48 inch (190 mm)
Stroke:8.66 inch (220 mm)
Speed: 1,500 rpm (50 Hz)
1,500 rpm with gear box
(60 Hz)
Gen-Set dimensions (inch):400 (length) x 90(width) x 110 (height)
Gen-Set dimensions (mm):8,300(length) x 2,200 (width) x 2,800 (height)
Gen-Set Weight: 53,200 lbs (22,400 kg)


Technical Specifications J620 GS
Number of cylinders / arrangement:20 / V 60°
Combustion:Lean burn principle
Bore:7.48 inch (190 mm)
Stroke:8.66 inch (220 mm)
Speed: 1,500 rpm (50 Hz)
1,500 rpm with gear box
(60 Hz)
Gen-Set dimensions (inch): 420(length) x 90 (width) x 110 (height)
Gen-Set dimensions (mm): 8,900 (length) x 2,200 (width) x 2,800(height)
Gen-Set Weight:66,180 lbs (28.000 kg)

Download More Information

Training

GE's Training Center gives you the possibility of taking a specific, customized course either in Jenbach or on site.

For more information on the GE Line of Jenbacher Products contact:

GE
Achenseestraße 1-3,
A-6200 Jenbach